HVAC Duct Cross is an HVAC duct fitting, drawn to scale in inches and delivered as a ready-to-insert DXF you can drop into any drawing. At its default parameters the plan-view footprint is 32in × 32in. It is parametric — adjust nominal size and width before or after you place it. Tagged for Commercial and Industrial work in the HVAC Duct (MEP) library. Free to download and free to use — no email gate, no symbol-pack invoice.
Direct download — no email, no account. DXF R2018, drawn in inches.
| Plan footprint (W × H) | 32in × 32in |
|---|---|
| Units | inches |
| DXF version | R2018 |
| Category | HVAC Duct (MEP) |
| File size | 55 KB |
Insertion datum: center (0,0); 4 ports E/N/W/S. Place it against that reference and the block lands aligned to your drawing.
| Parameter | Default | Range / options |
|---|---|---|
| Nominal size | 16in | 6in–96in |
| Width | 10in | 4in–48in |
Adjust parameters live inside the editor — open this block in CADdillo.
Free tier, all 217 blocks, no install.
